Вентилятор колонный vitek vt 1943 обзор
Обновлено: 10.05.2024
Инструкция VITEK VT-1943 для устройства вентилятор содержит страницы на русском языке.
Размер файла: 982.22 kB. Состоит из 2 стр.
FAN VT-1943
The fan is intended for artificial ventilation of rooms.
DESCRIPTION
Air outlet grid
Air flow speed symbols
Fan body oscillation mode symbols
Air flow mode symbols
Digital room air temperature/
timer operation time symbols
Control panel (5)
Remote control (17)
SAFETY MEASURES
Before using the electrical appliance read this manual
carefully and keep it for further reference.
Use the unit for its intended purpose only as specified
in this manual. Mishandling the unit can lead to its
breakage and cause harm to the user or damage to
his/her property.
Before switching the unit on for the first time make
sure that your home mains voltage corresponds to
the unit operating voltage.
Before using the unit examine the power cord
closely and make sure that it is not damaged. If
you find that the power cord is damaged, do not
use the unit.
Do not use the fan outdoors.
Place the unit on a flat, dry and steady surface
away from sources of heat or open flame.
Do not use the unit near containers filled with water,
next to a kitchen sink, in wet basements or near a
swimming pool.
Do not immerse the fan, power cord and power
plug into water or any other liquids.
Do not touch the unit body and the power plug with
wet hands.
Make sure that the power cord does not contact
with hot surfaces and sharp furniture edges.
Do not switch the unassembled fan on.
Do not insert any foreign objects into the open-
ings of the fan protective grids to avoid injuries or
unit damage.
Do not place the fan near curtains or house plants.
It is not recommended to stay under the air flow
coming from the fan for a long time (especially for
children and elderly people).
Never leave the operating unit unattended.
Unplug the fan before cleaning and when you
do not use the unit or before moving it to a new
place.
When unplugging the fan pull the plug but not the
cord.
Clean the unit regularly.
Do not leave children unattended to prevent using
the unit as a toy.
For children safety reasons do not leave polyethyl-
ene bags used as packaging unattended.
Attention! Do not allow children to play with polyethyl-
ene bags or packaging film. Danger of suffocation!
Do not allow children to touch the unit body and the
power cord during the unit operation.
The unit is not intended for usage by physically
or mentally disabled persons (including children)
or by persons lacking experience or knowledge if
they are not under supervision of a person who is
responsible for their safety or if they have not been
instructed by this person on the usage of the unit.
Attention! The unit contains a lithium battery. Prevent
children from swallowing the lithium battery. If your
child swallowed a battery, immediately see your
doctor.
Do not use the fan if the power cord or power
plug are damaged, if the fan works improperly,
after it has fallen or has been damaged in some
other way.
Transport the unit in the original package.
Keep the unit in a dry cool place out of reach of
children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY,
ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION
AREAS AND WORK SPACES IS PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage at low tem-
perature keep it for at least three hours at room
temperature before switching on.
FAN ASSEMBLING
The fan is supplied disassembled. Do not con-
nect the unit to the mains, if it is not completely
assembled.
Unpack the unit and remove any stickers that can
prevent its operation.
Check the unit for damages, do not use it in case
of damages.
Remove the fastening nut from the lower part of the
fan body (2) (Fig. 1).
Pass the power cord between the halves of the
floor support (1) (pic. 3).
Match the ledges on one half of the support (1)
with the openings on the other half of the sup-
port (1) and connect the support (1) halves till the
latches actuate (pic. 3).
Place the assembled support (1) on the lower part
of the fan body (2), make sure that the ledges on
the fan body (2) match the openings on the sup-
port (1) and after that fix the base (1) with the fas-
tening nut (pic. 3).
Fix the power cord in the channel of the support (1)
(pic. 4).
USAGE
Before using the unit for the first time, make sure that
the voltage in your mains corresponds to the unit oper-
ating voltage.
Insert the plug into the mains socket, you will hear
a sound signal and the room air temperature sym-
bols (11) will appear on the display (4).
Using the control panel (5) buttons:
Notes: - the operation mode buttons on the control
panel (5) are sensory, you just need to touch the button
to switch the necessary operation mode on.
depends on the mode selected with the button
(12 or 19) and is indicated with symbols (8) on
the display (4).
mode, the air flow speed is chaotically chang-
ing: from soft breeze to strong gusts of wind.
cycles, sleep mode, in this operation mode all
symbols on the display (4) will go out in 15 sec-
onds except for the symbol
Unplug the unit.
Remote control (17):
Functions of the buttons on the remote control (17)
fully correspond to the buttons on the control panel (5).
Press on the lock of the battery holder (23) and
remove it from the remote control (17).
Insert the SR2025 battery into the holder (23)
strictly following the polarity.
Insert the battery holder (23) into the remote con-
trol (17).
Note: - if there is an isolation insert in the battery com-
partment, remove the insert.
If you are not going to use the unit for a long time,
remove the battery from the remote control (17).
Note: - replace the battery in the remote control (17)
in time.
CLEANING THE FAN
Before cleaning the fan switch it off and remove the
plug of the power cord from the socket.
Wipe the fan body (2) with a soft, slightly damp
cloth and then wipe it dry.
Do not use solvents or abrasives for cleaning the
unit body (2).
Do not immerse the fan body (2), the power cord
and the plug into water or any other liquids; pro-
vide that water does not get into the fan body (2) to
avoid electric shock or damaging the unit.
To clean the grids (3 and 6) you can use a vacuum
cleaner with a corresponding attachment.
Make sure that the power cord does not touch
sharp objects or furniture edges.
Before taking the fan for long storage clean it, dis-
assemble the floor support (1), remove the battery
from the battery compartment of the remote con-
trol (17), pack the fan into its packaging and put it
to a dry cool place away from children and disabled
people for storage.
Before switching the fan on next time assemble
it, check its workability and integrity of the power
cord isolation.
DELIVERY SET
Fan body – 1 pc.
Base – 1 pc. (consists of two pieces)
Remote control – 1 pc.
Manual – 1 pc.
TECHNICAL SPECIFICATIONS
Fan
Supply voltage: 220-240 V, ~ 50 Hz
Power consumption: 45 W
Remote control
Supply voltage: 3 V (SR-2025 battery)
The manufacturer preserves the right to change the
specifications of the unit without a preliminary noti-
fication.
For environment protection do not throw out the unit
and the batteries with usual household waste after its
service life expiration; apply to the specialized center
for further recycling.
The waste generated during the disposal of the unit
is subject to mandatory collection and consequent
disposal in the prescribed manner.
For further information about recycling of this product
apply to a local municipal administration, a disposal
service or to the shop where you purchased this
product.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be obtained
from the dealer from whom the appliance was pur-
chased. The bill of sale or receipt must be produced
when making any claim under the terms of this guar-
antee.
Читайте также: